热处理对挤压态Mg-6Gd-5Y-1Zn合金组织与性能的影响

通过对Mg-6Gd-5Y-1Zn(质量分数,%)合金在固溶和时效处理状态下显微组织和力学性能的研究发现,α-Mg基体、沿挤压方向分布的条状18R-LPSO相、少量的Mg₂₄(GdYZn)₅ 相以及细层片状的14H-LPSO相构成了挤压态合金的组成相。挤压态合金经固溶(T4)处理后,一部分18R-LPSO相溶入基体,并且基体中的14H-LPSO相伸长同时粗化。挤压态合金经过固溶加时效(T6)处理后,大量β′相从α-Mg基体中析出。T6态合金的室温力学性能最好,其屈服强度、抗拉强度及伸长率分别为272 MPa、406 MPa和6.1%。β′相沉淀也发生在挤压态合金的直接人工时效(T5)处理过程,但相比于T6处理,14H-LPSO相和β′相在基体中的体积分数均偏低。     

考虑流固耦合的Spar型浮式风力机涡激运动特性研究

对弹性支撑单圆柱在均匀流作用下的涡激运动特性进行数值模拟,捕捉到"锁定区"、"拍"、"频率变换"等现象。柱体周围流场采用Fluent求解,将4阶Runge-Kutta方法代码写入用户自定义函数(UDF)求解运动微分方程,运用动网格技术更新流场,实现圆柱与流场的非线性耦合作用。发现随着折合速度的增大,涡激运动响应可分为锁定前支、锁定区、锁定后支3个阶段,在进入锁定区前(折合速度Ur=3)横向运动响应发生拍现象,当跨过锁定区后(折合速度Ur=10)发生频率变换现象。结果表明,横向涡激运动有较大范围的频率锁定现象,频率解锁前后圆柱涡激运动轨迹由"右8字"形变换为"左8字"形。     

Controlled enzymatic hydrolysis on characteristic and antioxidant properties of soybean protein isolate-maltodextrin conjugates

This study aimed to investigate the effect of limited hydrolysis on conformational and antioxidant properties of soy protein isolate-maltodextrin (SPI-Md) conjugates. Extrinsic fluorescence analysis showed unfolding of the protein molecule and exposure of hydrophobic groups in SPI-Md conjugate hydrolysates. Free amino acid analysis showed that, the contents of hydrophobic amino acids in SPI-Md conjugates increased after hydrolysis. The contents of leucine, isoleucine, phenylalanine increased from 0.32, 0.30 and 0.54 to 1.36, 1.86 and 2.60, respectively, when the hydrolysis degree (DH) gradually increased from 0% to 5.7%. The FT-IR spectrum showed that C = O absorption of the amide group formed by glycosylation continued unabated after limited hydrolysis (DH 2.9%). The glycated SPI products showed good reducing power and superior resistance to lipid oxidation (34%, 12 mg mL^?1), whereas the limit hydrolysates (DH 2.9%) of SPI-Md conjugates showed more ef?cient radical-scavenging capacity (89.5%, at 12 mg mL^?1) and iron-chelation activity (91.3%, at 12 mg mL^?1). Results of this study indicated that, slight enzymatic hydrolysis (DH 0–2.9%) could help partially unfolding the globular structure of SPI-Md conjugates without deteriorating amide bonds and had a positive effect on their antioxidant properties.     

抽油井不压井作业装置及抽油泵底阀设计

江苏油田的部分油井存在油管短路、地层高压低渗、漏失严重等问题,这些问题造成压井作业困难,并且压井作业过程中的井控与环境污染风险较大。为了进行不压井检泵作业,同时缩短检泵之后的产量恢复周期,进行了不压井作业技术研究,并研制了不压井作业装置。为解决起下抽油杆过程中的防喷问题,改进了抽油泵底阀结构,该结构可实现起下抽油杆过程中油管不带压、无溢流,并保障起下油管过程中的井控安全。该技术在江苏油田现场应用9井次,效果良好。     

Physicochemical structure characteristics and intrinsic reactivity of demineralized coal char rapidly pyrolyzed at elevated pressure

This study aims to investigate the effect of pyrolysis pressure on the physical and chemical structure characteristics and reactivity of subbituminous demineralized coal char. The pyrolysis experiments were studied under different pressures using a pressurized drop tube reactor (PDTR). Structural properties of coal chars were investigated by the application of scanning electron microscopy (SEM), nitrogen adsorption analyzer, automatic mercury porosimeter, and Raman spectroscopy, respectively. The Random Pore Model was used to determine kinetic parameters and intrinsic reactivity of chars. The specific pore volume of chars pyrolyzed at 900–1000 °C increased first and then decreased with pyrolysis pressure increasing, and the maximum value of the specific pore volume of chars occurred at 1.0 MPa. The degree of graphitization of chars deepened with the increase of temperature or pressure. Intrinsic activation energy of char-O₂ was within the range of 126–134 kJ/mol. The intrinsic reactivity of char-O₂ reaction showed strong correlation the Raman parameters with the change of pyrolysis conditions, and it suggested that the intrinsic reactivity of char-O₂ reaction was mainly affected by aromatic ring structures rather than pore structures.     

王坡煤矿煤层顶板稳定性主控因素分析

煤炭开采过程中极易发生顶板事故。基于王坡煤矿的地质条件，利用钻孔、井下钻探、物探、生产揭露资料，分别对该矿煤层顶板沉积特征、煤层顶板岩石结构特征进行系统分析研究，通过实验室室内测试，获取了煤层顶板岩石抗压强度、泊松比、坚固性系数、黏聚力等物理力学性质指标，最终确定了影响煤层顶板稳定性相关因素；运用层次分析法确定影响因素的权重值，得出岩石力学性质是影响煤层顶板稳定性的主控因素。研究可为类似煤矿顶板稳定性因素分析提供借鉴。     

不同含量低污染水对人工湿地中细菌的影响研究

探究水平流人工湿地(HFCW)系统处理低污染水过程中,相同COD/ρ(TN)下不同碳氮含量对细菌群落结构的影响。结果表明,进水为较高碳氮含量的HFCW(HF1)和进水为较低碳氮含量的HFCW(HF2)对COD和TN的去除效率具有一定的差异,HF1和HF2对COD的去除效率分别为48.26%和28.89%,对TN的去除率分别为79.06%和81.87%。HF1中细菌的丰富度和多样性均高于HF2,HF1中富集的优势细菌为Chloroflexaceae、Comamonadaceae和Rhodocyclaceae,均具有异养反硝化功能,HF2中富集的优势细菌为Xanthomonadaceae和Rhodocyclaceae,其中Xanthomonadaceae具有自养反硝化功能。COD、NH4^+-N和NO3^--N对HF1中细菌群落的影响大于对HF2中细菌群落的影响,HF1中COD对细菌群落的影响大于NH4^+-N和NO3^--N。     

Structure variation and energy storage properties of acceptor-modified PBLZST antiferroelectric ceramics

Energy storage capacitors with high recoverable energy density and efficiency are greatly desired in pulse power system. In this study, the energy density and efficiency were enhanced in Mn-modified (Pb_0.93Ba_0.04La_0.02)(Zr_0.65Sn_0.3Ti_0.05)O₃ antiferroelectric ceramics via a conventional solid-state reaction process. The improvement was attributed to the change in the antiferroelectric-to-ferroelectric phase transition electric field (E_F) and the ferroelectric-to-antiferroelectric phase transition electric field (E_A) with a small Mn addition. Mn ions as acceptors, which gave rise to the structure variation, significantly influenced the microstructures, dielectric properties and energy storage performance of the antiferroelectric ceramics. A maximum recoverable energy density of 2.64 J/cm³ with an efficiency of 73% was achieved when x = 0.005, which was 40% higher than that (1.84 J/cm³, 68%) of the pure ceramic counterparts. The results demonstrate that the acceptor modification is an effective way to improve the energy storage density and efficiency of antiferroelectric ceramics by inducing a structure variation and the (Pb_0.93Ba_0.04La_0.02)(Zr_0.65Sn_0.3Ti_0.05)O₃-xMn₂O₃ antiferroelectric ceramics are a promising energy storage material with high-power density.     

Effect of nonsolvent additives on PES ultrafiltration membrane pore structure

Different nonsolvent additives, namely, diethylene glycol, n-butyl alcohol (NBA), and ethylene glycol monomethyl ether, were added into the casting solution (polyethersulfone/dimethylformamide/lithium chloride) to prepare ultrafiltration (UF) membrane via phase inversion. The effects of different additives and their concentration on the pore structure of the prepared UF membrane were studied. The cross-sectional morphology of the membrane was observed via scanning electron microscopy. The addition of nonsolvent additives improved the large-cavity structure of the membrane. When the additive was low-content NBA (1–3 wt %), the membrane pore structure transformed from large-cavity structure to fully sponge-like structure. When the content of additive NBA was 3 wt %, the flux of the prepared UF membrane was 130.45 L (m⁻² h⁻¹), the rejection of PEG20000 was 95.54% and the flux remained high at 4 bar in long-term stability test. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47525.